How to find out the RAM brand and model on the computer?

When you assemble any computer or buy a ready-made system, you may not have mastered all the components. Or, over time, he may wonder what these hardware are, replacing some components with new ones You can also request. In this sense, the question of how to learn the RAM brand and model in the computer is also very curious.

The classic method: looking at RAM in person

• This is the healthiest way to access all information about your RAM.
• First, make sure your computer is completely off, turn off the power button and unplug it.
• Open the side cover of your computer and access the hardware panel.
• There are two latches both above and below your installed RAM or RAMs. Remove the RAM from the chassis by pressing these two latches at the same time. Pressing a single latch first can damage the RAM.
• After removing the RAM, turn it over. The size, type and frequency of your RAM will be right above the serial number.

Using application: CPU-Z

• CPU-Z is one of the simplest and most effective programs that has been used for years to see the hardware on the computer in detail.
• First of all, download and install the program on your computer by clicking here.
• Run CPU-Z and click the ‘Memory’ button on the panel at the top of the program.
• You can easily see the type of your RAM in the Type section, its size in the Size section and the frequency values ​​in the DRAM Frequency section.
• Here, if you see the phrase Dual in the Channel section, you need to know that you have the total values ​​of the two RAMs.

Using CMD (MS-Dos Command Prompt)

• First of all, the first thing you need to do is click on the Start menu and type CMD in the search tab.
• When MS-Dos Command Prompt appears, right click and open the application as administrator.
• At this stage, to see a lot of information about your RAM, copy this command line and press enter:
  wmic MemoryChip get MemoryType, Name, Capacity, Configuredclockspeed, DeviceLocator, FormFactor, Manufacturer, Serialnumber, Speed
• If you want more information about your RAM, you can also add these lines after get part:
  ConfiguredVoltage, DataWidth, MaxVoltage, CreationClassName, InterleavePosition
• Here are the codes needed to see all the information about your RAM: WMIC MemoryChip List /?

In this article, we tried to talk about learning the ram model. If you know a different method on the subject, do not forget to share your views with us in the comments section.