UEFI Windows 11 USB preparation guide

Windows 11, the newest operating system to be offered 6 years after Microsoft’s recently announced Windows 10, is finally available. We have finally come to the end of this process in which we inform you about the latest innovations during the beta process. Official Microsoft Windows 11 ISO file has been released. Apart from Windows Update, clean UEFI Windows 11 USB preparation guide is with you.

What is UEFI?

UEFI stands for “Unified Extensible Firmware Interface” meaning “Unified Extended Software Interface” in Turkish. It is a new firmware that replaces old BIOSes. New generation systems use UEFI instead of BIOS.

Thanks to the UEFI installation, we can format our disks as GPT (GUID Partition Table). This method allows us to use 2 TB and above disks with full capacity.

Is my computer UEFI or BIOS?

To answer this question before installation Windows ExplorerOpen and in the address bar C:WindowsPanthersetupact.log type and press Enter. Find the following lines in the opened file by pressing CTRL+F:

Callback_BootEnvironmentDetect:

Detected boot environment:

At the end of this line, after the colon you can see if you are using BIOS or UEFI.

If the setupact.log file is not found on your system and if you are using Windows 8, 8.1 or 10, Win+R Open the Run box by pressing the keys and msinfo32 in summer.

When the System Information tool opens, “BIOS ModeFind the ” line. If it says “Legacy” across the line, you’re using the BIOS. If you are using UEFI you will find the required information here.

If you wish, without further delay What we need Let’s sort things out;

– At least 4GB capacity USB stick (preferably USB 3.0)

– Rufus software

– Windows 11 x64 ISO file download

UEFI Windows 11 USB preparation guide

step 1: After downloading the Rufus software and ISO file, insert your empty USB memory into your computer with the features we have specified. Then open Rufus. In the window that appears, first of all, let’s choose the device where we will burn the Windows 11 ISO file.

step 2: After selecting the USB memory to perform the operation Windows 11 ISO that we downloaded under the name of boot selection We select the file.

step 3: In our next step, we need to set the image option. Here Standard Windows Installation We leave the option fixed. In disk partition layout GPT and MBR We have two options.

The point we should pay attention to here is; If you have a device with a next-generation BIOS interface GPT, if you have a device with an old generation BIOS interface MBR You have to select the option.

We don’t need to change the target system setting either.

step 4: When we come to the formatting options, type the new name you want to give your USB as the volume label. file system and separation unit size We leave the setting at the default options determined by Rufus.

In the advanced formatting options, “Quick Format” and “Create extended label and icon filesAfter leaving the ” options checked startWe can start the writing process by pressing .

At the end of the writing process UEFI Windows 11 USB our memory is ready for clean install successfully.

step 5: Before starting the Windows 11 installation We need to make an important adjustment. your device to BIOS settings enter. located here AHCI ModeActivate .

step 6: Let’s make the setting that will allow you to boot your computer from USB in the BIOS settings. when you enter the BIOS Boot tab enter, put your USB disk at the top of the list in the list that comes up. F10 When you save by pressing the key and restart the system, your system will start by working over USB.

You can have the new Windows 11 version by following the installation steps, and you can solve the problems you may experience with the upgrade by doing a clean installation.

Did you like our UEFI Windows 11 USB preparation guide? Please indicate your questions in the comments.