Tuner Output Overloaded What Does It Mean, How To Fix It?

Even though we have a new habit of watching over the internet instead of traditional television systems, most of the users still watch television via a central satellite system or dish antenna. During such a connection, users suddenly appear ‘Tuner output overloaded.’ error warning is frightening most of the time because the phrase overload brings to mind an electrical problem.

‘Tuner output is overloaded’ on all televisions watched Vestel, Regal, Seg, Philips or Tivibu. error warning may appear, but this is not a brand specific problem. The cause of this problem may be in the LNB unit, the tuner output, the cable itself or the central exchange. If you can’t fix it yourself, it would be best to call a technical service. Bride ‘Tuner output overloaded.’ what does it mean, how to fix Let’s see all the details.

How to fix ‘Tuner Output Overloaded’ error?

First of all, what is tuner input and tuner output?

In old or new televisions, the points where the broadcast from the central satellite system or dish antenna is connected to the device, that is, satellite connection ports It is called a tuner. The word tuner input is not used much, these points are generally called tuner outputs.

So ‘Tuner output overloaded.’ what it means?

Generally, we see ‘Tuner output overloaded, pull out the TV plug from the socket!’ this error warning, in the central satellite system or dish antenna connection. It is a warning message that appears on televisions due to an error. You may come across sentences like:

• Tuner input failed.
• Tuner output overloaded.
• No tuner input.
• Lnb output overloaded.
• A short circuit occurred at the Lnb output.
• Unplug your television.

‘Tuner output overloaded.’ What causes the error?

‘Tuner output overloaded.’ the error warning mentions an overload and for suggesting you unplug your TV Many people think that this is an electrical problem, but the reason for this error is the central satellite system or satellite dish connected to your television.

This type of broadcast comes from the satellite to your dish, is carried to your television via cables. There may be some transmission devices or LNB-like units in between. This is why ‘Tuner output is overloaded.’ When you encounter an error warning, you should suspect that there is a problem in the process from the dish to your home.

‘Tuner output overloaded.’ How to fix the error?

Method #1: Check the tuner output:

‘Tuner output overloaded.’ If you are getting an error warning, the first place you should check is the tuner output points of the television. These points because it wears out over time loosening or rusting may occur. Try to clean and fix the tuner output. If there is, you can see if the problem is with the tuner output by connecting the connecting cable to a different output or TV.

Method #2: Check the cable connecting to the tuner output:

If there doesn’t seem to be any problem with your TV’s tuner output, our next suspect is the connection cable. Especially due to the angle of attachment There may be breaks or breaks in cables that are constantly on the same slope. In fact, these ruptures and breaks can occur anywhere in the cable.

All you have to do at this point is to check the entire cable and see if there are any visible dents or tears. if any you can replace this cable with a new one Or you can cover the torn parts with electrical tape. It’s actually best to cut the wire and reconnect it securely, but don’t risk it if you haven’t done this before.

Method #3: Check the incoming port to your home if available:

Before you go up to the roof and check the dish and its connections, you need to look at an intermediate port. In some buildings, the cable from the central satellite system is not drilled through your walls. connects to a device and transported through the wall to your home. Check if there is a problem with the connection ports or cables of this device. Secure the ports and connect a new cable if applicable.

Method #4: Check the wire coming from the dish to your house:

Broadcast from the central satellite system or your dish antenna with cables of varying lengths depending on how many floors your building has. transported to your home. These may hang from the apartment space or some walls may be punctured and passed through. Something may have happened to your cable on this long journey.

Since such cables are generally only at the points that experts can easily reach, don’t put yourself at risk. Check the cables at visible points, if any, or find out if any work has been done in the apartment that day that will affect this cable. Depending on the situation, the cable can be repaired or replaced.

Method #5: Check the LNB unit in the dish:

In the central satellite system or your dish antenna, there is a device called the LNB unit, which converts the signal from the satellite and transmits it to you via cable. This device is similar to the tuner output. The LNB unit may be loose, damaged or broken due to many different reasons, resulting in ‘Tuner output overloaded.’ may have caused the error.

Method #6: Check your TV:

‘Tuner output overloaded.’ When you get an error, the things to suspect are the tuner output, connecting cables and LNB unit, but this may not always be the case. Sometimes a glitch in the TV As a result, you may encounter this and similar error warnings.

‘Tuner output overloaded.’ To check if the error warning is caused by a television malfunction, turn off the TV, unplug the satellite cable and turn on the TV. Even if no cable is connected to the tuner output. If it continues to warn, there is a fault in the TV.

Error warning on TVs we use with satellite connection ‘Tuner output overloaded.’ what does it mean, how to fix We talked about solution methods that you can apply by answering frequently asked questions. If you are experiencing such a problem and are not experienced in connection work, do not risk yourself and do not forget to call the technical service of your broadcast provider.