Things to Do Before Going to Vehicle Inspection

Is it time for your vehicle’s inspection? Whether you are going to take your motorized or non-motorized vehicle for inspection, you should check the to-do list before the vehicle inspection. Otherwise, your vehicle will not pass the inspection and you will be wasting your time. If you want a problem-free process, you should be familiar with what is checked during vehicle inspection.

It was carried out by TÜVTÜRK to determine the adequacy of vehicles in traffic. vehicle inspections As a result, vehicles are reported as perfect, slightly defective, seriously defective or unsafe.

To come out perfect among these categories, Things to do before vehicle inspection there is. Once you know what you need to pay attention to in your vehicle, you can leave the inspection without a headache.

Things to do before vehicle inspection:

  • First of all, check if there is any debt on your vehicle.
  • Have exhaust gas emission measurement done.
  • If there is any missing equipment in your vehicle, complete it.
  • Are your brakes working properly?
  • Make sure your steering is normal.
  • Check your vehicle’s lighting system.
  • Check if there are any problems with your windows and mirrors.
  • Don’t forget to check the seat belts.
  • Take good care of your tires.
  • There are also criteria that LPG vehicles must comply with.
  • Complete your vehicle documents.
  • If everything is okay, you can make your appointment.

First of all, check if there is any debt on your vehicle.

Before moving on to the technical details of your vehicle, check the status of your debt. Make sure that there are no penalties such as traffic fines, tax debts, OGS illegal passing fines etc. for your vehicle. Otherwise, the debtor inspection procedures of vehicles not starting. You can also pay your debt within seconds from the Digital Tax Office.

Have exhaust gas emission measurement done.

Exhaust gas emission measurement

Both fixed and mobile From TÜVTÜRK vehicle inspection stations You should have your vehicle’s exhaust gas emission measured. In this test, which is carried out to measure the harmful gases your vehicle emits to the environment, it is checked whether the exhaust emissions comply with certain standards.

On the list of things to do before vehicle inspection: Unless this process is fulfilled, your vehicle will be reported as seriously defective.

If there is any missing equipment in your vehicle, complete it.

First aid kit, triangle reflector, fire extinguisher and spare wheel are on the list of things that should be present in your vehicle. If you have used any of them or if they are missing, it would be beneficial to complete them because Things checked during vehicle inspection These are also included in the list.

You can check the list of equipment that varies according to vehicle class here.

Are your brakes working properly?

Checking the brakes during the inspection is standard procedure. brake system control under; The brake force values ​​of the front and rear axle system, left and right wheels are checked. Between two wheels for service brake brake force difference It must be at least 30 percent. In addition, the brake efficiency is checked to be at least 50 percent. Parking brake control is also included in the brake system checklist.

That’s why you should make sure that your vehicle’s brake system is solid. You may want to test the vehicle’s stopping distance by pressing the brake pedal and schedule a repair shop visit if there are any problems. While you’re ready brake fluid level You can have it checked.

Make sure your steering is normal.

In vehicle inspection The steering system is also checked. The steering wheel must be solid and you must be able to steer the vehicle in the desired direction easily. Before the inspection, it is useful to check whether the steering system has any movement, squeaks or any other problems. You should not go for an examination without fixing such problems.

Check your vehicle’s lighting system.

What is checked during vehicle inspection?

“What is checked during vehicle inspection?” One of the items on the list is the lighting system. Make sure that your vehicle’s front and rear lighting systems, signals, interior lighting systems and reversing lamp are intact and working. If there is a faulty lamp, you can go to the mechanic who deals with car electricity.

Check if there are any problems with your windows and mirrors.

During the vehicle inspection, the condition of the windows and mirrors is also checked. Therefore, before going to the inspection, it is useful to check whether the windows and mirrors are broken, cracked or missing. glass washing system The fact that it is in working order and that there is sufficient windshield washer water are among the factors that will attract the attention of the inspection officers.

Don’t forget to check the seat belts.

safety belt

Seat belts are one of the important criteria for your safety.What should be done before vehicle inspection? Another answer to the question. You should not go for an inspection without making sure that your seat belts are complete and in working order.

Take good care of your tires.

tire tread depth

Worn, split, torn or cut tires Elements that will not be accepted during inspection. Therefore, check your tires regularly and change them when the time is right. Also remember that tire tread depth should not be less than 1.6 mm on passenger vehicles.

Moreover tires depending on vehicle speedCare is also taken to ensure that it is suitable for the load it carries. Keep this information in mind and make sure that your tires meet the conditions.

There are also criteria that LPG vehicles must comply with.

If your vehicle has LPG, CNG or LNG, you should know that it must be entered into the license with a modification inspection. Those who do not want to fail the vehicle inspection This detail should not be overlooked.

Complete your vehicle documents.

chassis number

A document in your vehicle’s Traffic and Registration Records chassis number is available. Make sure this number matches the number on the body of your vehicle. If your chassis number is lost or cannot be read as a result of renovation, repair, accident, wear or decay, you must obtain an originality report from the authorized institutions.

In addition, license traffic insurance and power of attorney (if the vehicle you take to the inspection does not belong to you) are among the other documents you must have with you when you go for the inspection.

If everything is OK, you can make your appointment.

vehicle inspection

If you have reviewed every detail in your vehicle, seen a mechanic where necessary and believe that it is now ready. vehicle inspection appointment You can take. You can make your way to the inspection stations by making an online appointment via the TÜVTÜRK website or from customer services.

Other things checked during vehicle inspection:

  • Checks such as your vehicle’s fuel type and number of seats are performed.
  • The locking system of the engine hood is checked.
  • By looking under the hood, the main brake master cylinder, brake booster, brake fluid level, hoses in the engine pool, battery and battery connections, electrical installation, sealing, insulation, fluid levels, oil and fuel leaks, shock absorber connection towers are checked.
  • Check the stability of the driver’s seat in the vehicle.
  • Attention is paid to the heater, horn, control and mileage indicators.
  • The underside of the vehicle is checked for fluid, oil and fuel leaks.
  • The condition of the body and carrier parts is also checked.
  • Wheel bearing clearances, tie rod ends and ball joint connections are other elements that are examined.
  • The rim damage status is checked.
  • The suitability of the wheel spaces is checked.
  • The brake limiter, if present in the vehicle, is also examined.

Depending on the report received after the vehicle inspection, either continue or repeat.

After everything is done, you will be delivered a report showing the condition of your vehicle. If in the report flawless or slightly flawed If it says, you have successfully passed the inspection process. However seriously defective or unsafe If the report has been received, you can go for a re-examination free of charge at the same or a different station in the same district within 1 month at the latest.

Checking your vehicle on these basic points before going for vehicle inspection, inspection process can make it more seamless. However, even if you pay attention to all these, there may be problems that can only be detected by inspection experts. Remember though, taking a little precaution can prevent a lot of stress and time loss!

Our other content about vehicles that may attract your attention:

RELATED NEWS

Don’t Do These 7 Moves When Driving a Manual Transmission Car!

RELATED NEWS

If You Drive a Car with Automatic Transmission, Don’t Make These 10 Mistakes!

RELATED NEWS

Does the Start/Stop System Used for Fuel Saving Damage the Car Engine? Things Change a Little Depending on the Age of the Vehicle!

RELATED NEWS

9 Signs That Your Vehicle May Break Down Soon


source site-36