What is Engine Bearing Wrap, Why Does It Happen?

Buying a new car today has become much more difficult than in the past. Due to the increasing prices, many people cannot buy a car, or even if they do, they turn to second hand. However, the second-hand market is also quite large. As a matter of fact, the cars we have are very We need to protect better. Because when the car breaks down, we can face thousands of TL in costs.

Bearing winding, which is a malfunction in the engine of the car, is perhaps one of the worst malfunctions that can happen to you. The most important thing to do when you encounter this malfunction is to pull right and call roadside assistance. Because if you don’t do it You may face serious costs.

If you do not look at the oil and water of the engine, what is the bearing wrap that you will encounter?

First of all, bearing winding is a malfunction in the engine. Understanding this malfunction is not so difficult, but you need to act quickly. To understand why such a malfunction occurs We need to know the parts inside the engine.

inside the engine There is a piece that we call the bed. This part prevents the friction of rotating parts in the engine. There are two types of these bearings in the engine. Of these; The part between the engine block and the rotating crank is called the main bearing, and the part between the piston rods and the crankshaft is called the sleeve bearing. Request engine temperature too high (overheating) or lack of oil causes the bearings to rub as a result of not performing their duty. The main culprits of the malfunction are the oil level falling to a critical level or the engine cooling system.

How can I tell if the engine of my vehicle is yellowed, what are the symptoms?

Bearing winding, which can be considered as one of the biggest failures that can happen to the engine, is the first symptom is oil lamp. The car wants to tell us there is a problem here. If we consider that the main cause of the failure is the lack of oil in the bearings, the oil lamp gives us the first indication.

Let’s say the oil lamp came on and you didn’t care much. This time, symptoms begin to appear in the vehicle, which can be understood during operation. At advanced levels, metallic sounds come from the vehicle’s engine. Like “plug – knock – knock” these sounds that announce metal rubbing against metalindicates that your engine is preparing to embark on a path of no return. If you ignore this noise coming from the vehicle and continue to run the engine, the result will be You may need to build a motor from scratch.

Ok, the engine bed is wrapped, how can we fix it?

Actually, the answer to this depends on the level at which you noticed the malfunction. For example, the car has no oil left and your car has a bearing. If you notice this right away, you can fix the problem with much less parts replacement, but if you encounter a problem that is so advanced that you can hear the sound from inside the vehicle, levels that will burn your pocket It is quite possible that you will encounter a high repair fee.

If your vehicle’s engine has become bed-ridden, you should work with a good and reliable master. Normally, there is a gap that is too small to be seen between the bearing and the part. In the middle of that space oil film takes place. Because of this extremely fine detail, it needs to be repaired using parts that know their job well and that have not been used before.

I hope you will never have such a problem with your vehicle. Now you know about mattress wrapping, which is both expensive and annoying. Remember that you are the first doctor of your vehicle. Check the oil and water of the vehicle at least once a week, you can always tell if something is wrong by listening to the sound of the vehicle.