Should We Press the Button While Applying the Handbrake or Should We Not?

Do you press the button when applying the handbrake or not? According to popular belief, the teeth of the handbrake wear out if you do not press the button. It sounds logical anyway. So should we trust this information, how much of it is true?

Those who say that the button should be pressed while pulling the handbrake, if the button is not pressed, The teeth of the latch will wear out. claims. But this common thought, although it sounds logical, is not true. So why?

To find out How the handbrake mechanism works Let’s take a look and see what can and won’t happen when you shoot without pressing the button.

First, let’s look at the working principle of the parking brake:

Handbrake, also known as parking brake; It rotates around the pin and pulls a cable connected to the brake molds (the part that provides stopping power and supports the pad, which is produced to start pressing the disc in order to produce it, carries the pad and moves back and forth towards the disc). This cable pulls the brakes and puts pressure on the rear brakes.

You can also see how the locking mechanism works in the GIF below:

When you press the button it is released and you can unlock it. Afterwards, you can release the handbrake. As you can see from the GIF below, when you pull up without pressing the button, it just makes a sound. It slides into place and locks. The peg fits between the teeth, not on top. No matter where you pull it, the mechanism is inherently impervious to wear.

By pressing the button every time your vehicle thinks you are doing something good, you can reduce the life of other parts.

If you do not want the handbrake mechanism to wear out, you should apply as little force as possible because force changes, wear of the system spring it causes.

When pulling the handbrake allowing the mechanism to do its own work You should allow it and use the button only when necessary. Otherwise you can reduce the life of the broadcast by half!

“But my handbrake is worn out, why then?” If you say so, continue reading.

handbrake button

The main cause of wear is due to heat. For example, if the brake disc rotates too quickly, to high temperature may cause. As car parts heat up, the chance of wear increases. The same goes for all other parts. For example, if you drive at high speed for hours, your tires will wear out due to heat.

In short, the last thing you should worry about when towing without pressing the handbrake button should be wear. your parking brakes without pressing the button You can withdraw with peace of mind. It does not allow wear due to its mechanism.

Our other content that may interest you:

RELATED NEWS

Why is the “Ford Crown Victoria”, which we see as a police car and taxi in movies, so popular in America?

RELATED NEWS

Some Sounds Emitted from Many Technological Products, From Cars to Vacuum Cleaners, Are Actually Fake: There’s a Clever Reason!

RELATED NEWS

We Asked a “Vehicle Technology” Expert: How Can We Extend the Life of Our Cars?


source site-33