How to Lift a Car on a Slope? The Simplest Methods

Today ramp in traffic or high slope we may have to drive on the roads and in some cases do a lot of stop-and-go. At this point, drivers who do not know the techniques of lifting cars on the slope and cannot get used to it, either slide their vehicles back or make them stop. The main thing here car lift without skidding on a slope because if you parked on any slope or if the traffic is heavy, you don’t want to crash into the car behind you.

Vehicle lifting methods on the ramp consist of 2 different methods in total. one of them handbrake while lifting with the other clutch is a method of getting up. We will talk about these two methods, but it is worth remembering that lifting a car on a hill with the handbrake, steering wheel forbidden in exams. Therefore, if you are going to take the exam, do not forget to take a look at the second method.

How to lift the car on a slope?

Method #1: Lifting the vehicle on a slope with the parking brake (Forbidden in the Exam):

Step #1: With the vehicle running, shift into neutral

Before starting the method, if our vehicle is not operational, let’s start our vehicle with the help of the key by pressing the clutch. If our vehicle is in another gear, keep the clutch fully depressed and take your foot off the accelerator. neutral gear forehead. The best way to know you’re in neutral gear right and left is to shake. If the gear plays comfortably to the right and left, your gear is in neutral. After making sure that our vehicle is running and in neutral gear, we can move on to the next step.

Step #2: Pull the handbrake all the way

If you have started your vehicle a long time ago and lowered your handbrake, you can use this method. up to the end You will need to pull. Pull your lowered handbrake all the way up and make sure it is fully engaged. Remember that the number one element of this method will be the handbrake. When the handbrake is fully applied, a crash sound will take it out. This means you have successfully done the audio extraction. Now go to the next step.

Step #3: Put the car in first gear and put your right foot on the accelerator pedal

Now, we will shift our vehicle into first gear, which is the starting gear. For this, as you probably learned, press the clutch all the way and first gear We’re making the transition. In this process, we definitely do not lower the handbrake. Since our handbrake is on, we don’t need to press the brake pedal at this point, so we can put our right foot on the accelerator pedal. You don’t need to step on the gas right away, just put it lightly on top of it.

Step #4: Start releasing the clutch with your left foot without releasing the handbrake

We had to release the handbrake on straight starting steps, but in this method, the handbrake would prevent us from slipping on the slope, so we had to lower the clutch during the process of raising the clutch. handbrake pull it should be. Start releasing the clutch slowly with your left foot. at a certain point in the sound of the engine to change and your vehicle to shake will begin. This point means that the vehicle is at the grip point and is now ready to take off.

Step #5: Keep your foot on the clutch when the vehicle starts to vibrate

When your vehicle’s engine sound starts to change and your vehicle starts to vibrate you are in the grip means. This point is when your vehicle is ready to take off and all it needs is to release the brake and in some cases. lightly gas This is where it should be given. Now we stop at the grip point, absolutely without letting go of our left foot. While holding down the clutch, we move on to the next step.

Step #6: Release the handbrake and hit the accelerator

Now we need to get rid of the brakes to get the vehicle up. We’ve kept it pulled up to this step. handbrake we can download. The vehicle may or may not start after the parking brake is released. If it starts, you have taken off and you can proceed to the next step, but if there is no take off, it will take a while. give off gas It can prevent your vehicle from drowning and ensure take-off.

Step #7: Release the clutch completely after the vehicle has traveled a certain distance and reached a certain speed

About one after takeoff distance to vehicle length after leaving and to a certain speed Once we’ve reached it, it’s time to let go of the clutch we’ve been holding at the clutch point. If you wish, you can try to release the clutch slowly during this process without waiting for the distance, but this should not be too fast. It may take some time to get used to the clutch release combination while accelerating, so stay calm. Release the clutch slowly and continue your journey. You have successfully done the hill start with the handbrake method.

Method #2: Lifting the vehicle on a hill using the clutch clutch:

Step #1: With the vehicle running, shift into neutral

The first step of this method is to start the vehicle or change our gear while it is running. to waste will be. To remind you that the gear is empty, you can understand it by shaking it to the right and left. If the vehicle is running and our gear is in neutral, we can proceed to the next step.

Step #2: Depress the brake and clutch pedals with your foot

In this method, we will put our foot on the brake pedal. In this method, our most important element will be the brake. When the handbrake is down, the thing that will prevent us from slipping on the slope will be the brake. a certain brake on force Hold it down and don’t let go.

Step #3: Lower the handbrake

Now it’s time to lower our handbrake, don’t forget to press and hold the brake pedal with your right foot and handbrake download. If your foot if not on the brake Don’t forget that your vehicle will start to skid.

Step #4: Shift into first gear with your right foot still on the brake

At this stage, the only thing keeping us on the slope will be the brake we press with our right foot. With the help of the clutch, which we press with our left foot, without moving this foot from its place. first gear let’s father Now we can bring our clutch to the clutch point and get the vehicle ready for takeoff. Now let’s move on to the next step.

Step #5: Release the clutch slowly and keep your foot still on the brake

Now it’s time for the most critical step. to the grip point is coming. Slowly move your left foot while your right foot is still firmly on the brake. to disengage start. If you leave suddenly, your vehicle will stop, so be careful.

Step #6: Keep your left foot on the clutch at that point as the vehicle starts to vibrate

When we slowly remove our foot from the clutch, the vehicle will start to vibrate at some point. flicker point and in the vehicle engine sound change It informs us that we have reached the point of understanding. Our vehicle is now ready to take off, and if you are truly in full grip, you will not slide back. Once you’re sure where the car starts to vibrate, stay there and keep holding.

Step #7: Release the brake with your right foot and give it some gas

While our left foot is at the clutch point, it is still depressed in that area. Now, with our right foot, we keep pressed until this step. release the brake we can give. Take your right foot off the brake and start accelerating. At this time, if you have done all the steps correctly, your vehicle will start to lift without slipping.

Step #8: Release the clutch after the car has traveled a certain distance and gained a certain speed.

We were able to successfully lift our vehicle, but our left foot is still in the clutch. As a final step, the vehicle must have at least one vehicle length distance as far as and to a certain speed After reaching our destination, we can continue on our way by removing our left foot from the clutch. If you wish, you can try to release the clutch slowly during this process without waiting for the distance, but this should not be too fast. It may take some time to get used to the clutch release combination while accelerating, so stay calm. With this step, you have lifted the vehicle using the clutch clutch.

In this article, we took a look at the methods and detailed steps of lifting a car without skidding on a slope. If you are preparing for the driving test, the second method is clutch method will be the most convenient for you because the handbrake lifting method banned in exam case. These steps with plenty of practice and more slopes and if possible in traffic-free areas You can master this job by repeating it over and over.